Makita HR3210C SDS Plus AVT Rotary Hammer Drill
1 x Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850W 240V Version.
The Makita HR3210C SDS Plus AVT Rotary Hammer Drill 850 Watt with 3 drilling modes of operation: Rotary drilling, Hammer drilling or Chiseling. Rotary drilling with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and chiselling.
It has a soft start operation to ensure a smooth and even start every time, and the torque limiter stops the drill when the bit hits against reinforcements. It also has a built in job light.
It features the unique Makita AVT Anti-Vibration Technology design employing the pneumatic pressure created in the drills hammer piston chamber to move a counter balance in the opposite direction to reduce the impact vibrations at the steel point. This dramatically reduces vibration.
It is supplied with; a side handle, depth stop, bit grease and a carry case.
Input Power: 850W
No Load Speed: 315-630/min.
Impact Rate: 1,650-3,300/bpm
Impact Energy: 5.0 joules
Capacity: Concrete 32mm, Core Diameter (TCT) 90mm
All vibration figures quoted are Tri-axial to EN60745 2006.
Vibration Drilling: 2.5 m/sec²
Vibration Chiselling: 7 m/sec²
Vibration Hammer Drilling: 10 m/sec²
Vibration K Factor: 1.5 m/sec²
Noise Sound Pressure: 89 dB(A)
Noise Sound Power: 100 dB(A)
Noise K Factor: 3 dB(A)
|Available to View & Touch
|Country of Design
|Made to Order
|Commercial, Domestic, Education Facility, Hospitality, Health Care, Industrial
|Click and Collect, Local Area Only, United Kingdom
|Returnable / Cancel
You can not add the review on this product as you have not purchased this product yet.
Delivery / Collection Options
UK CLICK & COLLECT
UK LOCAL AREA ONLY
UK ALL AREA