Liberon Spirit Sanding Sealer

Liberon Spirit Sanding Sealer quickly prepares the surface prior of bare wood and MDF prior to wax finishing decorative items. It will seal the surface so that less wax is needed and its special lubricants will ease sanding. For table tops, shelves and other surfaces that need a hard wearing finish, seal with Liberon Finishing Oil instead of Sanding Sealer and then finish with wax if required. On floors use Liberon Floor Sealer and then Floor Wax.

Purpose:
Liberon Spirit Sanding Sealer quickly prepares the surface of bare wood and MDF used for furniture and decorative items prior to wax finishing.
It seals the surface so that less wax is needed and its special lubricants ease sanding.

Performance:
- Ideal for sealing wood before waxing
- Suitable for use on all types of new or stripped furniture; including MDF
- Brush or cloth applied
- Ideal for use on turned woodwork

Preparation:
Ensure surfaces are bare, dry and free from dust. If you want to colour the wood apply Liberon Palette Wood Dye before the sealer.

Application:
Shake well before use. Brush on a thin coat of sealer, allow to dry for at least one hour and sand very thoroughly with 240 or 320 grit abrasive paper. Apply a second coat if required and resand after a minimum of one hour. Apply Liberon Black Bison Paste Wax using Ultra Fine (0000) Steel Wool.